The BC6-DC has all the great features of the original BC6, with the exception of the AC power capabilities. Charge up to 16 cells of NiCd/NiMH and 6S of Lithium batteries with a maximum charge rate of 5.0A.

Like the BC6, the BC6-DC has an individual-cell-voltage balancer built in, so you won't need an external balancer when charging Lithium batteries (Li-Ion/LiPo/LiFe). Want to charge 2 or 3 batteries at the same time? You'll also need one of our Multi-Pack Charging Harnesses.

Venom LiPo Batteries Venom NiMH Batteries Venom LiFe Batteries Venom TX/RX Batteries Venom LiHV Batteries Venom Battery Chargers Venom Power Supplies Venom Plug.

Be sure to pick up an adapter board so you can take advantage of this charger's balancing function. Adapter boards are not included with charger. Choose from the list below Single Battery Adapters Multiple Battery Adapters - Operating software Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning. - Individual voltage balancer for Lithium batteries BC6-DC has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing. - Accept various types of Lithium battery BC6-DC can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry.

MemProfiler's publisher gives no information on the saved data, instead leaving users' to interpret the numbers on their own. Deceptively listed as freeware, in actuality it is a limited demo that only displays the first 25 data points of each session. Without a help file, or interpretations about the saved data, MemProfiler is not. Initial parameter setup (users set up). Charging of lithium battery. Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on. Q Never leave the charger unattended when it is connected to its power supply. If any malfunction is found.

Jfk Reloaded 1 01 Crackberry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section. - Lithium battery 'Fast' and 'Storage' mode You can charge Lithium battery for special purposes.

'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage. - Maximum safety Delta-peak sensitivity: The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH) Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode. Capacity limit: The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value. - Data store/load For users convenience it can store maximum 10 data of different batteries. Torrent Softimage Xsi Software.

You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting. - Cyclic charging/discharging Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing. - PC based analysis using USB communication For technical expert, BC6-10 offers PC based program can analysis the characteristic of the battery by USB port.